Ebunge Partition - Your Trusted Movable Partition Manufacturer, Providing Reliable Space Management Solutions for Every Space.​

Stacking Pocket Corridor Refuge Point Circulation Audit

Quick answer: refuge point

A stacking pocket corridor refuge point circulation audit is a drawing-based review of how parked movable wall panels, the open corridor and any designated refuge area share the same floor zone. It is not a product test and it does not certify compliance. Its purpose is to expose conflicts early, before the pocket position, corridor width or refuge layout becomes difficult to change. This article sets out a practical review sequence for contractors, architects, interior designers, owners and renovation teams, and it separates what can be checked from drawings from what must be confirmed for each project.

Why the Pocket Location Drives the Whole Audit

EBUNGE movable partition panels are individually movable and suspended from a top track. They cross the opening without a floor track and park at a planned stacking position. That operating principle is simple to state, but it concentrates consequences at one point: wherever the panels come to rest.

When that resting point coincides with a corridor refuge point, the audit has to answer two questions at once. Can people still move through and gather as the layout intends? And can the panels travel to and from the pocket along a continuous, supported overhead route? Neither question is answered by a finish sample or a photograph.

Define the Audit Scope Before Drawing Conclusions

Start by writing down what the review covers. The suitability of each route and parking arrangement depends on the approved layout, circulation, ceiling interfaces and operating sequence.

Inputs to collect

Inputs to request rather than assume

Support and fixing requirements, acoustic expectations, dimensional tolerances and any regulatory position must come from the responsible project parties. EBUNGE can discuss pass-door requirements and project documentation, but the design team remains responsible for confirming that the proposed configuration suits the building.

Map Every Route: Straight, Turning and Stacking

Routes are reviewed from the layout, not from a generic assumption. A panel that travels in a straight line, a panel that turns a corner and a panel that nests into a compact stack each place different demands on the overhead path and on the space below.

Closed light-finish movable partition wall in an ornate interior
  1. Trace the straight run from the closed position to the pocket and mark every point where the overhead route must remain continuous.
  2. The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
  3. Mark the stacking route and the final parked footprint, including the space needed to place and retrieve the last panel.
  4. Overlay the refuge point and confirm that parked panels do not occupy the area the layout reserves for it.
  5. Walk the route on paper with the maintenance and operations teams who will use it daily.

A gap in the overhead route is a design problem, not something to solve on site. Every proposed movement path requires a continuous connected overhead route and project-specific support review.

Check Refuge Clearance and Corridor Movement Together

Refuge points and corridors are usually assessed as one continuous experience: a person moves along the corridor, reaches the refuge area and waits there. A stacking pocket inserted into that sequence can narrow the approach, reduce the waiting zone or introduce a place where panels are temporarily held open.

Use a simple comparison to structure the conversation. The table below describes what to check; it does not supply dimensions, because those must come from the project’s own requirements and applicable guidance.

Condition What to verify on drawings Who confirms
Pocket fully open Parked footprint clear of the refuge zone; approach route unobstructed Design team and owner
Panels in transit Temporary space used during movement is identified and acceptable Design team and operations
Partition closed Pass-door position and corridor continuity on both sides Design team and contractor
Overhead route Continuous supported path with no untracked gap Structural and partition coordination
acoustic top hung partition in a restaurant private room

Coordinate Finishes, Seals and Acoustic Expectations

Confirmed finish options include laminate, melamine, fabric, leather, glass and other approved surfaces.

Seals and acoustic concepts can be explained generically. Where a project has acoustic expectations, those must be confirmed against project-specific evidence.

Evidence note: this audit framework addresses circulation and coordination only. It does not certify acoustic, fire, structural or accessibility performance, and it does not replace review by the responsible design professionals.

Document Decisions and Close the Loop

An audit is only useful if its outcomes are recorded. Keep a short decision log that names each route, each conflict and each responsible party. Where a conflict cannot be resolved at concept stage, record it as an open item rather than assuming it will be handled during installation.

Before release for fabrication, confirm the pocket position, the stacking arrangement, the pass-door requirement and the overhead route against the latest coordinated drawings. Review the movable partition wall product context, then check the wider planning resources for supporting guidance. If the refuge point and the pocket cannot be separated, the design team should decide which element moves.

exhibition folding partition cost for hotel ballroom

Frequently Asked Questions

Can a stacking pocket be placed directly on a corridor refuge point?

That is a design decision for the project team, not a product default. The audit should test whether parked panels and the refuge area can coexist without conflict, and the responsible parties must confirm the outcome against project requirements.

Do movable partitions need a floor track through the corridor?

EBUNGE panels are top-hung and cross the opening without a continuous floor running track or floor hardware along the partition line. The overhead route still needs to be continuous and supported, and that must be reviewed for each layout.

How is the stacking position decided?

Parking style is customized to the customer layout and project requirements and may support compact stacking when the coordinated design permits it. The pocket location should be agreed from the drawings, not assumed from a standard arrangement.

Can the acoustic performance of the closed partition be guaranteed?

No guarantee should be inferred from this article. Acoustic ratings are descriptors, and installed performance depends on the specific assembly and project conditions. Confirm acoustic requirements with the responsible parties using project-specific evidence.

What should be included in the audit record?

Include the route drawings, the pocket footprint, refuge zone overlays, open coordination items and the names of those responsible for each confirmation. Keep the record with the project documentation so later changes can be checked against it.

Who should attend the circulation review?

Typically the architect, contractor, owner representative and the team responsible for daily operation. Their combined view is needed because a route that looks acceptable on plan may not work in practice.

Conclusion

A stacking pocket corridor refuge point circulation audit succeeds when it stays within its evidence. Map the straight, turning and stacking routes, test the refuge zone against the parked footprint, confirm the overhead path is continuous and supported, and record every open item for the responsible parties.

If your project needs a coordinated review of pocket position, pass-door requirements or project documentation, contact the EBUNGE team with your drawings and confirm the project-specific support, acoustic and dimensional requirements before proceeding.

Request a Free Quote

Send us a message if you have any questions or request a quote. We will be back to you ASAP!

WhatsApp