Quick project answer
A movable partition installation begins with clear decisions about how the room will be divided, combined and returned to open space. The EBUNGE system is top-hung, so the finished floor along the partition line stays physically uninterrupted. That single principle shapes the planning steps that follow. This article sets out the inputs, coordination points and approval stages that help a project team prepare a workable partition installation without relying on assumptions.
Start with the top-hung principle
In a top-hung movable partition, the panels hang from an overhead track rather than running on the floor. The EBUNGE system has no continuous floor running track and no operating hardware in the finished floor along the partition line. This matters for planning because the floor finish, underlay and adjacent thresholds can remain as designed. The partition installation therefore focuses on the overhead path, the panel stack and the coordination between those elements and the surrounding room.
Confirm the floor stays uninterrupted
An uninterrupted floor is a planning outcome, not a decorative detail. It means the partition installation does not introduce a continuous track or operating hardware into the finished floor along the partition line. Floor finishes can run through the opening without a cut line for a track. Thresholds, transitions and adjacent floor materials can be detailed as part of the general floor design.
This point is often raised early by interior designers and operations teams. They want to know whether the floor will be cut, whether a channel will appear, or whether hardware will sit proud of the finish. With a top-hung arrangement, those questions are answered by the system type. The floor remains physically uninterrupted by the maintained EBUNGE top-hung system.
Plan panel parking and stacking
Coordinate finish selection and care
Different finishes respond to different cleaning approaches. Some may call for a dry method, while others may accept a damp cloth or a specific product. Because methods vary, the care plan should be tied to the confirmed finish rather than to a generic routine. This is a coordination point between the buyer, the designer and the party responsible for ongoing maintenance.
Review non-limiting applications
Beyond hotels, the same planning logic can apply to other spaces that need to change between open and divided layouts. The common thread is a requirement for flexible space division, not a specific building type. Each partition installation still depends on its own coordinated drawings, parking arrangement and finish selection.
Gather buyer inputs before drawings
A smooth partition installation starts with complete buyer inputs. The project team needs to understand how the space will be divided, combined and reconfigured. It also needs to know where panels should park when the room is open. Finish preferences, care expectations and any coordination constraints should be recorded before drawings are prepared.
The following checklist can help organize those inputs. It is a planning aid, not a substitute for project-specific coordination.
- Describe the room uses and the ways the space may be combined or divided.
- Identify the preferred parking location and any adjacent space that must remain clear.
- Confirm the finish direction and the care method associated with that finish.
- Note any interfaces with adjacent finishes, ceilings or services that need coordination.
- Record the approval path for the coordinated drawings.
Move through drawing approval
A simple review sequence can keep the process organized. The table below shows typical checkpoints and the questions they answer.
| Checkpoint | Question to confirm |
|---|---|
| Overhead path | Does the coordinated drawing show the continuous overhead path for the partition installation? |
| Parking position | Does the approved parking arrangement match the intended stacking area? |
| Finish selection | Is the chosen finish recorded with its associated care method? |
| Floor continuity | Does the plan keep the finished floor uninterrupted along the partition line? |
Once the drawings are approved, the project team can proceed with the confirmed scope. For general product context, see the movable partition wall page. For related planning articles, visit the blogs section. To discuss project inputs, use the contact page.
Frequently asked questions
Does a movable partition installation require a floor track?
Provide the current layout, opening dimensions, ceiling information, intended room use, and relevant project drawings for review. The exact overhead route and support arrangement must be confirmed by the responsible project team from coordinated drawings.
Can panel parking be customized?
Panel parking style can be customized to the customer layout and project requirements, subject to coordinated drawings. A suitable approved parking arrangement can use the stacking area more compactly and coordinate with the space design. The exact track, support and panel layout still require project drawings.
Can finish materials be customized?
Confirm the finish selection before defining its material-specific cleaning and maintenance method. The project team should confirm the finish direction early so that care guidance matches the selected material.
Where can movable partitions be used?
Movable partitions can be used wherever flexible space division, combination or reconfiguration is required. Application examples are not limiting. EBUNGE has completed many types of hotel-related movable-partition projects, with ballrooms, wedding halls and multifunction halls as non-limiting examples.
What must be confirmed from the coordinated drawings?
Provide the current layout, opening dimensions, ceiling information, intended room use, and relevant project drawings for review. The exact overhead route and support arrangement must be confirmed by the responsible project team from coordinated drawings.
What inputs should a buyer prepare?
Useful inputs include room uses, combination and division needs, the preferred parking location, finish direction, care expectations and any interfaces with adjacent finishes or services. These inputs help the project team prepare coordinated drawings for the partition installation.