Clear Width Checks Where a Stacking Pocket Meets a Corridor Taper
Quick project answer
A stacking pocket corridor taper clear width check belongs on the drawing-review agenda as soon as a movable wall is planned to park near a corridor that narrows. The pocket consumes plan space, the taper changes the usable walking zone, and the panels must still travel from the opening to their parking position. This article sets out a review framework for contractors, architects, interior designers, owners and renovation teams. It does not supply dimensions, performance figures or approvals; those must come from project-specific drawings and confirmed documentation.
Why the pocket and the taper must be reviewed together
A stacking pocket is a planned parking position, not leftover space. EBUNGE movable wall panels are individually movable and suspended from a top track. They cross the opening without a floor track and park at the agreed stacking position. That operating logic means the route between opening and pocket is part of the design, not an afterthought.
A corridor taper adds a second constraint. The clear walking zone may reduce gradually along the corridor, and the pocket may sit exactly where that reduction occurs. Reviewing the pocket alone, or the taper alone, can hide a conflict that only appears when both are drawn on the same plan.
Evidence note: this article describes a review method. It does not confirm any clear width, acoustic value, structural capacity or compliance outcome. Confirm all dimensional, acoustic and support requirements against project drawings and the responsible specialists.
Map the movement route before debating the pocket size
Start with the path a panel follows. Straight, turning and stacking routes should be reviewed from the layout, because a route that looks simple in elevation may involve a turn in plan. The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
Route questions for the drawing review
- Where does each panel leave the opening, and where does it come to rest?
- Does the route pass through the tapered section, or only alongside it?
- Are there turns, and does the taper reduce space at those turns?
- Is the parking position reachable without crossing a separate circulation zone?
- Does the route remain legible when furniture, signage or door swings are shown?
Record answers on the plan rather than in separate notes. The suitability of each route and parking arrangement depends on the approved layout, circulation, ceiling interfaces and operating sequence.
Separate the three zones that share the taper
Where a pocket meets a taper, three zones compete for the same strip of plan: the corridor clear zone, the pocket footprint and the transition where panels move between them. Treating them as one zone tends to produce optimistic drawings.
| Zone | What to confirm | Evidence needed |
|---|---|---|
| Corridor clear zone | Usable walking width along the taper | Dimensioned plan with the applicable local requirement |
| Pocket footprint | Parking position and its boundaries | Coordinated layout showing the stacking position |
| Transition zone | How panels move between opening and pocket | Route review with turns and overhead continuity |
The table is a coordination aid, not a compliance checklist. Each row needs project-specific confirmation from the parties responsible for accessibility, structure and fire strategy.
Run a numbered clear width review
- Overlay the corridor taper on the pocket layout at the same scale.
- Mark the narrowest point of the taper and note what sits beside it.
- Draw the full panel route from opening to parking position.
- Identify every point where the route and the taper overlap.
- Check that the overhead route is continuous along the whole path.
- Confirm the parking position against the coordinated layout.
- Re-issue the drawing after each change and re-run the check.
This sequence keeps the discussion factual. It also prevents a late change to the taper from silently invalidating an earlier pocket decision.
Coordinate finishes, pass doors and documentation
Finish choices affect appearance and interface details, not clear width by themselves. Confirmed finish options include laminate, melamine, fabric, leather, glass and other approved surfaces. Where a pass door is required, discuss it early so the door position is tested against the taper rather than added afterwards.
Project documentation should show the pocket, the taper, the route and the parking position together. If any of these appear on separate drawings, ask for a combined view. The movable walls product page provides maintained product context, while the resources section supports general planning. Neither replaces a project-specific drawing review.
Know what drawings cannot prove
Acoustic requirements need their own project-specific confirmation.
Those items require the responsible specialists. The value of the clear width check is that it surfaces conflicts early, while changes are still inexpensive to coordinate.
Frequently asked questions
What is a stacking pocket corridor taper clear width check?
It is a drawing review that tests the usable corridor width where a movable wall parking pocket meets a narrowing corridor, while also checking the panel route between opening and parking position.
Do EBUNGE panels need a floor track along the corridor?
No. The panels are top-hung and move without a continuous floor running track or floor hardware along the partition line.
Can the pocket be placed inside the tapered section?
That is a layout decision for the project team. Review the route, the parking position and the corridor clear zone together, then confirm against the applicable local requirements and coordinated drawings.
Which finish should be specified near a taper?
Finish selection is separate from clear width. Confirmed options include laminate, melamine, fabric, leather, glass and other approved surfaces. Confirm suitability for the specific location with the project team.
How is acoustic performance confirmed?
Through project-specific acoustic documentation, not through the pocket drawing.
What should be included in the documentation package?
A combined plan showing the taper, pocket footprint, panel route, parking position and any pass door, plus the open questions raised during review.
Conclusion and next step
The stacking pocket corridor taper clear width check is most useful when it is repeated as drawings evolve. Keep the route, the taper and the parking position on one coordinated view, record assumptions, and route dimensional, acoustic and support questions to the parties who can confirm them. For project discussions, contact the EBUNGE team with your layout and requirements.


